Starting to run out of days but good progress is being made.
My assistant sanded the roof today all looks good there, since there was no flaws in the roofs paint bar a bad finish, we've only sanded too the high build primer which is still in good condition. we're blending the levels on the pilars. Only the leading edge which has holes in the metal to be filled needs to actually be cut back but this will be dont later when the front window trim has been removed.
The boot will be finished early tomorow morning and then ill fully seal it before cleaning and treating the rear window seal and trunk seal area's.
Anyway dinners ready and its been a 12 hour day almost so im going 2 eat. here's pictures.
Roof sanded
Passengers side of trunk finished.
Centre piece trimmed and pop rivited in after holes for 'spot welds' have been drilled.
Ta da. finished all bar grinding the welds down and putting metal patches over.... (see next picture)
The holes... which were just full of glue but I decided since i had the offcuts i'd properly seal with metal.
