Okay so 10 hours on it today but slow progress because the left piece which i spent the majority of the day working on needed to be 'reshaped' a lot to make it a good fit (unlike the right side which was very nice).
Anyway got about 1/2 or more of the spot welds finished on the left side so i'll finish that tomorow and hopefully manage to finish fitting the centre piece, thereby FINISHING the new trunk floor install. Then ill seal everything in the back end and address the alignment of the rear lights on the passenger side while my assisnt sands the roof and other area's ready to etch prime the 'body' probably this weekend coming!!! then its basicly BODYWORK TIME! !! !!!
Sanded down the spot welds and the leading and trailing edge.
After cleaning up this area and washing it with wax and grease remover, then coated this with etch primer.
Marks made and holes drilled for spot welds, mannny adjustments made to get it to sit correctly and seal well when 'rivited' into place.
Here is the left side with most of the spot welds finished and some of the trailing edge welded on in sections.
