The car is finished on the drivers side now. so the rust repairs have begun on the passengers side. the rear quarter isnt as bad as the drivers side however it still needs 2 big patches replacing.
Also there is no rust at the structure just behind the rear door on the passengers side, however there is rust at the top of the rear fender (go figure) so i'm going to have to replace metal up there ill take pics after work tomorow as ill be getting stuck into the rear quarter then now that wezz's front bar is finished (rx7 bar kept me busy after work on week days during last week or so).
Anyway I gota go out so going to wrap this up. Also confirmed with Craig that he's keeping the arial which is mounted in the front passengers fender on the vertical surface.
Pic of the boot with 90% of the rusted area removed. the rest will be finished when i get new grinding discs.
Here is the two area's im removing from the passengers rear quarter. All the crap on the ground came out of the fender.
Taped before being removed. to give a straight cut.
The rust which once again protrudes through the rear support panel
The rust repair on the drivers side behind the door finished.
